Olympia Chimney Flue Liner Replacement Nationwide

Olympia Chimney Flue Liner Replacement: The San Antonio Owner’s Guide

If you have an Olympia Chimney system and your flue liner has cracked, corroded, or separated, we stock Olympia Chimney-compatible replacement liners and install them in San Antonio homes every week. A full flue liner replacement typically runs $1,800 to $4,200 installed in San Antonio depending on flue height, liner diameter, and whether we need a crane, scaffolding, or just a straight ladder run from the roof. Most homeowners discover the problem the same way: a chimney sweep spots it during an inspection, or they notice flue tile fragments at the bottom of the firebox and call because that’s never a good sign.

Call (254) 276-4116

Here’s what matters if you’re holding an Olympia Chimney manual and wondering what went wrong. Olympia Chimney manufactures a full line of chimney system components including stainless steel liners, caps, and chase covers for factory-built fireplaces. When their liners fail, it’s usually not the stainless steel itself but the connection points, welds, or the surrounding insulation that’s broken down. We’ll walk through exactly what fails, what it costs to fix in San Antonio, and what you should ask any contractor before they touch your roof.

Which Olympia Chimney Models This Applies To

Olympia Chimney products are used in a lot of factory-built and prefabricated fireplace systems, and compatibility depends on the exact model and diameter. The most common liners we match in San Antonio are 5.5-inch, 6-inch, 7-inch, and 8-inch stainless steel flex liners, but some Olympia Chimney systems use a proprietary twist-lock connection rather than a standard clamp band. That’s the first gotcha: if your Olympia Chimney liner uses twist-lock sections, an off-the-shelf generic flex liner won’t mate to it without an adapter, and not every chimney company carries the right adapter on the truck. We do.

Identify your model by checking the metal data plate, usually located on the firebox floor, behind the lower grille, or on the chimney exterior near the chase top. The plate lists the model number and liner diameter. If it’s worn or missing, we measure the inside diameter of the existing liner at the top of the flue, which gives us the correct replacement size without guessing.

OEM Olympia Chimney liners are the safest match, but for several older Olympia Chimney models, the OEM liner is no longer manufactured. In those cases we install a high-grade stainless steel flex liner from DuraFlex or HeatShield that meets or exceeds the original specs, paired with the proper Olympia Chimney connection adapter. Hadley Chimney San Antonio is an independent service provider, not affiliated with Olympia Chimney, but we stock the adapters and connectors that let us work on their systems correctly.

Signs Your Olympia Chimney Flue Liner Replacement Is Failing

• Flue tile or metal fragments in the firebox. When the liner deteriorates or separates, pieces drop into the firebox. If you find small chunks of metal or ceramic in the ash or around the damper, the liner is actively failing and needs evaluation before the next burn.
• Smoke backing up into the room. A crack or separation in the liner disrupts the draft. Smoke that used to pull cleanly up the chimney now spills into the living room, and the problem often gets worse as the fireplace heats up and the metal expands.
• Visible rust or staining on the chimney chase or ceiling near the flue. In San Antonio’s heat-and-humidity cycle, condensation inside the chase is common. If the liner is compromised, that condensation carries creosote and acidic byproducts that stain drywall and rust the metal chase parts.
• A soft, flaky white residue on the exterior brick or stone around the chimney. That’s efflorescence, and while it’s not unique to Olympia Chimney systems, it points to moisture moving through the chimney structure, which accelerates liner corrosion in any metal flue.
• Your chimney sweep flagged it but you didn’t see photos. We hear this all the time. A homeowner is told they need a new liner but was never shown the crack, the corrosion, or the separation. If you’re hearing “you need a liner” without camera evidence, that’s a red flag about the company, not the liner.

Replacement Cost & What’s Included

In San Antonio, expect to pay $1,800 to $4,200 for an installed Olympia Chimney-compatible flue liner replacement, with most single-story homes landing between $2,200 and $3,200. The price moves based on four things: the length of the flue run (two-story chimneys cost more because the liner is longer), the liner diameter, roof accessibility (steep pitch or tile roof adds labor, which is honest math, not an upcharge tactic), and whether the surrounding chase or crown needs repair while we’re up there.

Here’s the line-item breakdown we show every San Antonio homeowner before work starts:

• Liner material: $700 to $1,600 depending on length and diameter
• Labor and installation: $800 to $1,800, including roof access and disconnect/reconnect of the appliance
• Connection hardware and adapter kit: $150 to $350 for Olympia Chimney-specific adapters
• Crown or chase repair (if needed): $300 to $900 added only with photo evidence and your sign-off

Every Hadley Chimney San Antonio flue liner replacement from Olympia Chimney-compatible parts carries our 365-Day Done Right Promise in writing. If the repair fails within 365 days, we come back and make it right at no cost, including the second visit. That’s our standard, not a promotional offer.

DIY or Call Us?

Let’s be direct: flue liner replacement is not a DIY job. You’re working at height, on a roof surface that can be steep or fragile, handling stainless steel liner sections that have sharp edges, and dealing with a component that if installed incorrectly becomes a carbon monoxide pathway into your home. The risk isn’t just a bad draft. It’s dangerous gas moving into the house while everyone sleeps. This is the one chimney component where we don’t offer any “here’s what you can do yourself” middle ground beyond one simple check: look in your firebox with a flashlight and see if there’s debris, rust staining, or loose material. If there is, call a professional. If you’re the sort who likes to understand the full picture before deciding, we’ll show you the camera footage from inside the flue. Cory Mitchell has been cleaning, inspecting, and repairing chimneys across the Southwest for the better part of two decades, and he built this company on the idea that you should “see the problem, understand the fix, then decide” before any tool touches your roof. Call (254) 276-4116 and we’ll set that up.

FAQs