A Hadley company - serving San Antonio, TX

Olympia Chimney Chimney Repair Nationwide

Masonry repairMasonry repair
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Olympia Chimney Chimney Repair in San Antonio: What to Know First

Olympia Chimney repair in San Antonio typically runs $400 – $2,800 depending on what’s actually failing, and we complete most mortar and flashing jobs within one to two visits. We’re an independent Olympia Chimney service provider, which means we repair and rebuild Olympia systems but aren’t a factory warranty shop. If you own a home with an Olympia flue, chase cover, or multi-flue cap and something is leaking, spalling, or letting smoke back inside, this page tells you exactly what we see in San Antonio homes, what it costs, and how we fix it. Call (254) 276-4116 for a free estimate.

Call (254) 276-4116

How Olympia Chimney Products Fail – and How We Fix Them

Olympia Chimney builds mostly stainless flue liners, chase covers, multi-flue caps, and termination components. The failure we see most often isn’t the Olympia product itself. It’s what the San Antonio climate does to the masonry and flashing around it. Here are the five patterns we repair regularly.

  • Chase cover rust-through on zero-clearance installations. The Olympia chase cover sits on top of a wood-framed chimney chase. San Antonio’s summer heat cycles plus humidity eventually eat through even galvanized covers, and once water gets into the chase, the Olympia liner and insulation start corroding from the outside in. We remove the failed cover, inspect the liner crown, and replace with a fabricated stainless cover before resealing the flue termination.
  • Flue liner corrosion at the cap seam. Olympia’s stainless flue liners hold up well, but the seam where the liner meets the cap or storm collar is a known weak point on older installs around Alamo Heights and Terrell Hills. Condensation from gas appliances has been dripping there for years, and eventually you get pitting and pinholes. We grind back the corroded section, splice in a matching stainless section, and reseal with high-temp compound.
  • Mortar crown cracking from thermal shock. This is a masonry issue, not an Olympia defect, but it’s the repair we pair most often with Olympia liner work. San Antonio’s 100-degree afternoons followed by 60-degree nights expand and contract the crown until it cracks, and those cracks funnel water straight down alongside the flue. We repoint, rebuild, or waterproof the crown depending on depth.
  • Spalling brick below the crown line. When water gets behind the brick face and freezes (yes, San Antonio gets freeze events), the brick face pops off in sheets. On older homes near Monte Vista and King William, we regularly see three to six courses of spalled brick above the roofline. We cut out the damaged brick, match it as closely as the market allows, reset, and repoint.
  • Flashing separation at the roof line. The galvanized flashing that seals the chimney to the roof deck eventually lifts, especially on steep rooflines. Once it lifts, every San Antonio downpour sends water into the attic and down the chase. We remove old flashing, install step and counter flashing with proper overlap, and seal with a polyurethane caulk rated for Texas UV exposure.
Explore

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Our Olympia Chimney Chimney Repair Process

Here’s what happens when you book an Olympia Chimney repair with us, from the first call to the final photo.

  1. 1
    Book over the phone. A live person answers (254) 276-4116, collects the address and what you’re seeing (leak, smoke, crumbling brick), and schedules a window. You get live arrival tracking, not a four-hour guess.
  2. 2
    Diagnostic inspection. The tech walks the flue with a camera, checks the crown, flashing, chase cover, and brick face. You get photos of everything. If your Olympia liner is corroded but the chase cover is fine, you’ll see proof of both.
  3. 3
    Written price before work. We quote the repair in writing before anyone picks up a trowel. If the flue needs an aftermarket stainless splice instead of an Olympia OEM section, we tell you and explain why it’s rated for this application.
  4. 4
    The repair. Mortar, flashing, waterproofing, liner section, or crown rebuild. On a typical repoint-and-flash job, one visit covers it. A full crown rebuild needs a return trip for cure time.
  5. 5
    Test and document. We run the system (when safe), take before-and-after photos, and send a digital invoice you can pay from your phone.
  6. 6
    365-Day Done Right Promise. Every Olympia Chimney repair carries a written one-year guarantee. If the repair fails within 365 days, the second visit is free.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Olympia Chimney Chimney Repair Costs in San Antonio

Here’s what we quote most often in San Antonio, and what drives the number up or down. These aren’t bait ranges; they’re what the camera inspection typically finds.

  • Flashing repair (step and counter flashing, reseal): $400 – $900
  • Mortar repointing (3 – 5 courses): $600 – $1,400
  • Spalling brick replacement (per course, includes repoint): $200 – $350 per course
  • Chase cover replacement (custom stainless): $500 – $1,100
  • Olympia liner splice (corroded section at cap seam): $700 – $2,000 depending on access
  • Crown rebuild and waterproof: $800 – $1,800
  • Full masonry rebuild above the roofline: $1,800 – $2,800

What moves the price: roof pitch, three-story access, chase height, brick match availability, and whether the crown or liner needs composite repair material like HeatShield or a full stainless replacement. We’ll show you the camera footage and explain what can wait. Call (254) 276-4116 for an exact quote. Estimates are free.

Why San Antonio Homeowners Call Hadley Chimney San Antonio for Olympia Chimney Work

We’ve been doing chimney repair since 2003, and Cory Mitchell, our owner, grew up in the trade before serving San Antonio homes. That matters when an Olympia flue is corroding in a way the homeowner can’t see without a camera. We carry OEM Olympia components where they matter, and we stock DuraFlex, HeatShield, and Gelco materials when a repair calls for a material that simply outperforms the original. Every job operates under The Relay Visibility Guarantee: live arrival, photo documentation, and a written price before work. And every repair carries our 365-Day Done Right Promise. If it fails, we return free. That’s not a promo. That’s how we run every Olympia Chimney repair in San Antonio.

FAQs

Need Chimney Cleaning help in San Antonio? Licensed & insured · Camera-inspected response · free estimates
Call (254) 276-4116
Local Service Coverage

Request a Free Estimate in San Antonio

Tell us what you need - Hadley Chimney San Antonio responds fast. No obligation.

When you send us your details, you agree to our Privacy Policy and consent to receive communications by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch